- AIT pioneered phase-change adhesives and thermal pads since early 1990’s and patented phase-change thermal interface pads with high compressibility to accommodate and use for power devices with large area power devices with uneven surface roughness and warpage.
- Choice of phase-change temperatures from 50°C to 125°C for different operating conditions.
- Choices of thermal and/or electrical conductivity from diamond, silver, aluminum nitride, boron nitride, alumina, and engineered blends of thermal ingredients.
- Production choices of standard dry pads to one-side tacky or both side tacky from 20 micron to 2,000 micron thickness.
- AIT distinguishes itself for pioneering flexible thermal and/or electrically conductive adhesives in film and paste for microelectronic applications since early 1980’s.
- Choices of thermal and/or electrical conductivity from diamond, silver, aluminum nitride, boron nitride, alumina, and engineered blends of thermal ingredients.
- Production choices of standard dry film adhesives to one-side tacky or both side tacky.
- Snap-curing options for all paste and film-tape adhesives.
- AIT is strong advocates of non-silicone based thermal interface greases to avoid both drying-migration problem inherent in silicone greases.
- Setting industry standard for high-vacuum and DRIE-process-compatibility thermal greases.
- Choice of greases for device temperature from 125°C to 250°C.
- Choices of thermal and/or electrical conductivity from diamond, silver, aluminum nitride, boron nitride, alumina, and engineered blends of thermal ingredients.
- Choices of specialty greases that cured in-situ or with applied heat to adhesive-gels.